基于光楔阵列产生光学涡旋阵列的研究

在研究光楔衍射法产生单涡旋的基础上,基于长条形光楔阵列,提出了利用光束阵列衍射产生涡旋阵列的方法.该方法要求光束阵列在平行于光楔边缘方向上的光束间距等于光束直径的整数倍.利用超精密机床采用一体化加工法加工了光楔阵列元件,验证了该方法的可行性.利用空间光调制器快速灵活调整光束阵列的优点,搭建了借助空间光调制器加载达曼光栅衍射产生所需光束阵列的实验光学系统.针对光束阵列与光楔阵列的匹配问题,研究了达曼光栅掩模图基本单元对光束阵列的调控,获得了可调结构的光束阵列.实验产生了拓扑荷一致的光学涡旋阵列,与仿真结果相一致,证明所提方法的有效性.     

Landau damping in a bounded magnetized plasma column

The damping decrement of Landau damping and the effect of thermal velocity on the frequency spectrum of a propagating wave in a bounded plasma column are investigated.The magnetized plasma column partially filling a cylindrical metallic tube is considered to be collisionless and non-degenerate.The Landau damping is due to the thermal motion of charge carriers and appears whenever the phase velocity of the plasma waves exceeds the thermal velocity of carriers.The analysis is based on a self-consistent kinetic theory and the solutions of the wave equation in a cylindrical plasma waveguide are presented using Vlasov and Maxwell equations.The hybrid mode dispersion equation for the cylindrical plasma waveguide is obtained through the application of appropriate boundary conditions to the plasma-vacuum interface.The dependence of Landau damping on plasma parameters and the effects of the metallic tube boundary on the dispersion characteristics of plasma and waveguide modes are investigated in detail through numerical calculations.     

Recent advances in polymer network liquid crystal spatial light modulators

Polymer network liquid crystal (PNLC) spatial light modulators are attractive for display and photonic applications because they can achieve submillisecond response time while keeping a large phase change. However, their on-state scattering caused by the grain boundary of LC multidomains hinders their applications. In this article, we review recent progress on the development of scattering-free PNLCs extending from short-wavelength infrared to visible region by reducing the domain sizes to ∼200 nm through low temperature curing process. To reduce operation voltage, both transmissive and reflective modes, LC material properties (birefringence and dielectric anisotropy), polymer composition and concentration, and pretilt angle effect are analyzed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 183–192     

Optical modulator using metal-oxide-semiconductor type Si ring resonator

Electric-field drive optical modulators using a Si ring resonator were fabricated on silicon-on-insulator (SOI) wafers. The fabricated resonators consisted of Si waveguides with width and thickness of 1.0 and 0.3 μm, respectively. In order to induce the linear electro-optic (EO) effect in the Si core layer, the strain was applied by covering the layer with Si₃N₄ film (0.26 μm thick) deposited by low pressure chemical vapor deposition (LPCVD) at 750 °C. The vertical electric-field was applied to the Si waveguide through the top and bottom cladding layers, and the optical output from the drop port at the resonance wavelength was measured. At a wavelength of 1501.6 nm, the optical modulation of 33% was obtained at 200V (electric-field at the silicon surface ∼3 × 10⁵ V/cm, nearly the breakdown field). The resonance wavelength was shifted toward the short wavelength side by applying both positive and negative voltages, this shift was explained by carrier concentration modulation. The linear EO effect in the Si core layer was not observed, presumably because the strain in the Si core layer was too small.     

Photonic crystal waveguides for coarse-selectivity devices

We discuss devices based on photonic crystal planar waveguides for use as wavelength-selective applications via the mini-stopband extraction mechanism. We present experimental data for the core of a compact demux system. We show that spatial and spectral behaviours are as intended from coupled-mode theory, as well as from the finite-difference time-domain approach. Finally, we propose architectures with large crosstalk and some inherent fabrication-related advantages achieved by duplicating the basic multimode waveguide and using it as a spectral filter.     

基于金属包覆磁性波导结构的磁光Bragg器件特性分析

使用金属包覆磁性波导中的磁光耦合理论分析了静磁表面波与导波光在金属／电介质／钇铁石榴石／钆镓石榴石结构中的磁光共线作用，讨论了金属覆层和斜向场对磁光模式转换效率的影响。计算表明，金属包覆波导可以提高磁光作用，通过调节金属覆层与磁性薄膜间距得到了比空气／4a铁石榴石／钆镓石榴石的传统三明治波导情形高8．7dB的模式转换效率；而同时优化偏置磁场方向和金属包覆波导参数，模式转换效率可以进一步提高5．25dB。因此，金属包覆波导可以用于提高磁光Bragg器件性能，在微波和光信息处理等方面具有广阔的应用前蒂。     

Optical waveguides in LiNbO<Subscript>3</Subscript> and stoichiometric LiNbO<Subscript>3</Subscript> crystals by proton exchange

The formation of optical planar waveguides in LiNbO₃ and stoichiometric LiNbO₃ crystals by proton exchange was reported. The prism-coupling method was used to characterize the dark-line spectroscopy at the wavelength of 633 and 1539 nm, respectively. The mode optical near-field outputs from proton-exchanged LiNbO₃ and SLN waveguides at 633 nm were presented. The mode field from stoichiometric LiNbO₃ (SLN) waveguide is lighter and more uniform than that from LiNbO₃ waveguide, which means the quality of the waveguide in SLN crystal is better than that of the LiNbO₃ waveguide. For proton-exchanged LiNbO₃ waveguides, the evolution of the refractive index profile with annealing was presented. The disorder profiles of Nb atoms in proton-exchanged LiNbO₃ waveguides were obtained by Rutherford backscattering/channeling technique. It is shown that the longer the exchange time, the larger the displacement of Nb atoms. Supported by the National Natural Science Foundation of China (Grant No. 10475052) and the Scientific Research Start-up Financing of Qufu Normal University     

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.     

Characterization and Spatial Matching of Laser Diode Beams

It is shown that the type of lateral waveguide of a laser diode cannot be determined uniquely based on just the measured magnitude of astigmatism. For a unique determination, the K-factor of Petermann, which characterizes the wavefront curvature at the laser output facet, must be measured as well. In order to determine the type of lateral waveguide, a setup for measuring astigmatic distances in the range 0–200 m with an error of ±2 m and a K-factor with an error of 20% was developed. Operational features of the setup were analyzed, and a technique that allows one to minimize the effect of beam ellipticity on the measurement results was found. Using the technique, the optimization of spatial matching of a laser diode with a ring interferometer of the butterfly type was accomplished. For transformation of the astigmatic elliptical beam into the axially symmetric mode of the interferometer, we have used an optical system that consists of two cylindrical and one spherical lenses. The algorithm for designing the matching system was developed, and the 85% injection of radiation of a AlGaAs laser diode into the principal mode of a ring interferometer was experimentally demonstrated.     

MOSFET调制器的实验研究

 介绍了MOSFET调制器的基本原理，并对其并联分流和感应叠加两种开关结构进行了实验研究。基于可编辑逻辑器件设计了其触发电路，驱动电路采用高速MOSFET对管组成的推挽输出形式，加快了MOSFET的开关速度。利用Pspice软件对开关上有无剩余电流电路(RCD)两种情况进行仿真，结果表明，加装RCD电路可以有效吸收MOSFET在关断瞬间产生的反峰电压。实验中，电流波形用Pearson线圈测量，用3个MOSFET并联作开关，当电容充电电压为450 V，负载为30 Ω时，脉冲电流13 A，前沿20 ns，平顶约80 ns；用3个单元调制器感应叠加，当电容充电电压为450 A，负载为30 Ω时，脉冲电流强度为40 A，前沿25 ns，平顶约70 ns。